Determine the system regeneration schedule and set up the controller as follows:
1. Pull out the date pins on the Skipper Wheel on the control panel.
2. Rotate the date dial to the arrow pointing to the current date;
3. Press the date pin corresponding to the date that needs to be regenerated;
4. Pull out the lower right time dial (Timer Knob) of the control panel and rotate until the time pointer (Time Arrow) points to the current date (according to the factory default parameters, when the time pointer points to the current time, the program will be at 2 am Semi-automatic entry into regeneration or rinsing procedures).
5. The timer will automatically start the regeneration program at 2:30 in the morning. If you want to regenerate in advance or later, you should adjust the setting time to be faster or slower. For example: It is 3:00 pm. If we want the system to regenerate at 12:00 midnight, we need to set the current time on the timetable to 5:30 pm. If the system needs to be regenerated at 8:30 in the morning, we need to The current time on the time dial is set to 11:30 noon (the time indicated by the arrow will no longer be the correct time).
Backwash or quick rinse | Brine with slow rinse | ||
Pull out the number of pins | time | Push pin number | time |
1 | 8 | 2 | 1.5 |
2 | 11 | 3 | 4.5 |
3 | 14 | 4 | 7.5 |
4 | 17 | 5 | 10.5 |
5 | 20 | 6 | 13.5 |
6 | twenty three | 7 | 16.5 |
7 | 26 | 8 | 19.5 |
8 | 29 | 9 | 22.5 |
9 | 32 | 10 | 25.5 |
10 | 35 | 11 | 28.5 |
11 | 38 | 12 | 31.5 |
12 | 41 | 13 | 34.5 |
13 | 44 | 14 | 37.5 |
14 | 47 | 15 | 40.5 |
15 | 50 | 16 | 43.5 |
L-Phenylalanine,L Phenylalanine Powder,L Phenylalanine Cas 63-91-2,Food Additive Nutrition Supplement
CHANGZHOU GUANGHUI FOOD INGREDIENTS CO.,LTD , https://www.gsweetfood.com