NTC9210, anti-vibration flood light "NTC9210" NTC9210
Model: NTC9210 Name: Shockproof floodlight Brand: Dalang Electric
Overview:
The NTC9210 anti-vibration floodlight is suitable for a wide range of lighting in a variety of large-scale operations, construction sites and building facades, as well as lighting needs for construction machinery, facilities and urban landscapes.
A performance:
/ With high-efficiency gas discharge as the light source, the lamp has a service life of more than 10,000 hours, which is especially suitable for outdoor large-area unattended lighting.
/ Lightweight alloy material and high-tech spraying technology, the shell will never rust and never corrode. The interior of the lamp body is double-shocked by structure and material, and the whole lamp has good seismic performance.
/ Adopt new technology such as piping to ensure the integrity of the outer casing, reliable sealing, waterproof and dustproof.
/ With good electromagnetic compatibility, it will not cause electromagnetic interference to the surrounding environment.
/ The overall temperature rise of the lamp is low, and the heat dissipation is good, which can reduce the probability of failure.
/Equipped with humanized design and environmentally friendly color matching, it is fully harmonious with natural landscape.
Second use:
1. According to the site environment and lighting needs, after determining the appropriate installation position and mode, prepare the φ12-14mm three-core cable according to the length of the ballast to the 220V power contact.
2. Unscrew the fixing screw of the rear cover of the ballast, open the back cover, then loosen the compression screw of the cable inlet of the ballast, and introduce one end of the cable through the pressing screw to the input terminal of the control circuit board. Connect the L, N and grounding wires of the cable to the terminal block, and then tighten the cable fixing screw and tighten the rear cover of the ballast with screws.
3. Install and fix the lamp and ballast with φ10mm expansion bolts at the selected installation location.
4. When replacing the bulb, first loosen the three butterfly screws in the middle of the lamp cap, then force the tail of the lamp cap to open the lamp cap, screw down the bad bulb and replace it with a new bulb, and then restore the lamp cap in the reverse order.
Warning: The power must be turned off before disassembling, repairing, and replacing the lamp.
Three Note:
1. Keep the lamp and ballast housing clean, so that the lamp has good heat dissipation performance.
2. Non-professionals are not allowed to disassemble lamps and ballasts at will.
3. The luminaire must have a reliable grounding.
4. When working, the power supply voltage should be kept within 220V±10% to ensure the service life of the ballast.
Four technical parameters:
Power: 250W/400W
Rated voltage: 220VAC 50Hz
Light source type: MH/HPS gas discharge lamp housing protection: IP65
Dimensions: φ462 × 445mm
Total weight: 7.2kg
Five quality assurance:
NTC9210 anti-vibration floodlights are strictly in accordance with ISO9001:2000 international quality management system standards for quality control, to ensure that product quality is higher than national standards, fully meet the design requirements, the product is guaranteed for 7 years, the light source is guaranteed for one year, from the date of purchase. Within 7 years, any failure of the product under normal use is the responsibility of the company for free maintenance.
Agricultural Seed Drills,Precision Seed Drills,6 Rows Precise Seeder,Seeding Machine
Shandong Dahua Machinery Co.,Ltd , https://www.agrodahua.com