Rape Ditching Machine Safety Operation Precautions

At present, the mechanized cultivation of rapeseed, that is, the development of trencher, is very popular. However, due to lack of safe operating technical knowledge of rapeseed trencher, mechanical accidents and personal injury accidents often occur. In order to ensure safety, the operator should pay attention to the following matters during operation:

First, the operators should consciously participate in the training course for rapeseed ditching machines organized by local agricultural machinery departments. Seriously learn the structure, working principle, maintenance, troubleshooting and safe operation of the trencher, and master the safe operation techniques of the trencher.

The second is that before the operation in Shimoda, the operator must carry out comprehensive inspection and maintenance on the tractor and the trencher. To maintain a good state of technology, put rapeseed cultivation in trenching operations.

Third, before starting the engine, the clutch handle of the trencher should be placed in a separate position, and then be driven into the field, and the clutch handle should be placed on the combined position to adjust the depth of the trench.

The fourth is to decelerate ahead of time when the work is turning to the corner of the field, and to place the opener clutch handle on a separate position, and then pinch the tractor steering handle to make a turn. To achieve "a look, two slow, three turns."

Fifth, when the machine is transferred, the rotating power of the trencher should be cut off. That is, the trencher clutch handle is placed in a separate position. At the same time, it is necessary to reduce the walking speed. If there is a high field height during the transfer, the low level shall be adopted after digging.

Sixth, during operations, it is best to wear safety glasses to prevent mud splashing and injury to the operator's eyes during trencher operation.

Seventh, when inspecting, adjusting and maintaining the tractor and the trencher, it must be done under the condition that the engine is shut down and stopped to avoid accidents.

classification The editor 1, the disc sanding Disc sanding sanding, sanding, grinding wheel, also called windmill advantage is alien sanding can usually; Defect is the difference in heat dissipation performance bonding, low efficiency of sanding. Disc sanding machine, grinder, Angle Grinder, grinding machine Disc sanding machine, grinder, angle grinder, grinding machine (6) A, a large "desktop windmill sanding machine", but due to the low efficiency of sanding, replace emery cloth is not convenient, poor operation, so using less and less. B, small are: electric grinder, pneumatic grinder, electric hand wheel, hand wheel, electric electric grinding, starting electric grinding, bench grinder, etc., these small sanding polishing equipment, because of small size, easy to carry, easy to operate, widely used in all walks of life. But the efficiency is low. 2, belt sanding Belt sanding and abrasive belt sanding, the advantage is good heat dissipation, high luminous efficiency, widely used, suitable for sand light plane and compare rules, but in different

Orbital Sander

orbital sander, electric sander,

ZHE JIANG ULITE TOOLS MANUFACTURE CO.,LTD , http://www.ulitepowertool.com