After the end of the quarterly work of the combine harvester, it should be well kept to extend the service life of the machine. In the long-term storage, to ensure the integrity of the machine, not to lose parts, to prevent the deformation of the machine, "damage, corrosion, etc.. Care should pay attention to the following:
1. Use a medium and large throttle to stop the harvester for 5 minutes before shutting down to remove debris from the aircraft.
2. Thoroughly remove the wheat hull and mud in and out of the combine.
3, according to the requirements of the instructions, lubrication of the lubrication points. Rubbing the metal surface with oil is rust proof.
4. Releasing the safety clutch spring and header auger floating spring.
5. Remove all the belts, wipe away the dirt, apply talcum powder, attach the label, and hang it for storage.
6. Remove the chain and place it in diesel or kerosene for cleaning. Then, drain it for 15 to 20 minutes and replace it with the machine oil or kelp.
7. Completely inspect vulnerable parts, such as header auger, telescopic rod guides, moving blades, fixed blades, friction plates, rollers, gravure screens, cleaning sieves, etc. If damaged, repair or replace damaged zeros. part.
8. Put the harvesting table down and place it on the wood. Relax balance spring. Front and rear axles jacked up and covered with wooden blocks.
9, remove the battery, check and keep.
10. Remove the tire and store it in a room at room temperature of -10 to 20°C.
11. When storing the warehouse of the combine harvester and parts, attention should be paid to ventilation, fire prevention, and fire prevention facilities.
Rongcheng Jingyi Oceanic Technology Company Limited , https://www.jingyifoods.cn