The specific methods of artificially assisting high-yield forced moulting for laying hens are as follows: 1. Flocking chickens. Before artificially assisted high-yield laying hens in laying hens begin to moult, they first need to eliminate diseased, weak, and residual chickens, and then vaccinate them for mandatory immunization. Select a certain number of chickens for weighing records (usually 1/15-20 for chickens is appropriate), said to calculate the average body weight, as the basis for determining the theoretical time for the artificial auxiliary compulsory moulting and high-yielding feeding methods for laying hens. 2, stop eating water. The artificial assisted forced moulting and high-yielding rearing for laying hens began to be applied. The chickens were stopped for 10-15 days, and the water was stopped for 1-3 days (the specific time should be based on the weightlessness of the chickens and hair removal), and artificial lighting should be stopped at the same time. After the end of the cycle, the normal water supply is restored and the weighing is performed. 3, determine the weight. In order to accurately determine the weight loss of chickens, a weighing was performed on the fifth day after the material was cut off, so that the next weighing time was determined based on the weight loss of the chickens. 4, resume feeding. When 80% of chickens in a flock lose 28-30% of their body weight, they begin to resume feeding, and they are fed a high-protein diet that provides sufficient methionine and cystine to promote rapid regeneration of their feathers and resume production as soon as possible. The specific feeding standards are: 11 kJ per kilogram of solar energy, crude protein content of 16-17%, calcium content of 3-4%, and phosphorus content of 0.7%. The feed requirements for moulting the layer were: 1/3 of the original diet on the first day, 2/3 of the original diet on the second day, and normal feeding on the third day. 5, attention. When using laying artificially assisted forced moulting and high-yielding rearing for laying hens, the mortality rate will not exceed 5% as long as the timing is properly grasped; if the broiler mortality is found to exceed 5%, it is abnormal, and the cause should be promptly identified and taken as necessary. The measures are adjusted for healing. 6, open production efficiency. After artificially assisting high-yielding forced moulting and feeding for laying hens for one week, laying hens can start laying eggs, and the laying rate can reach 50% after the first week. The second laying cycle of laying hens can use about 270 days, and the laying rate is about 10% lower than the first laying cycle. However, the egg weight can be increased by 10%, and the overall benefit of feeding is basically the same as the first cycle.
Our Honey include polyflora honey, Acacia Honey, sunflower honey, buckwheat honey, linden honey, Vitex Honey etc. Our
main clients are come from EU and some other countries. Usually they like the package as iron drums with 290 kgs. However, we have IBC tank also, it can load 1400 kgs for net. Our raw honey purchased from bee keeper directly, so that we can control the quality very well. We can supply different type of honey according to your required parameters and package also.
Honey
100% Pure Honey,Mixed-Flowers Honey,Polyfloral Honey,Acacia Honey,Multi-flower Honey,Chaste Honey
Easy Food (Jiaxing) Co., Ltd. , http://www.jxeasyfood.com