Depending on the type of plastic pulverizer and the working conditions, the methods of use and maintenance are also different. Generally, the following eight points should be paid attention to when using the plastic pulverizer.
1. Before starting, the drive wheel should be moved one or two times by manpower. After confirming that the movement is flexible, the plastic crusher will start to operate, and the plastic crusher will wait until the plastic mill is running normally.
3. Pay attention to the temperature of the bearing during operation. Make sure that the bearing maintains a good lubrication state, and pay attention to whether the sound and vibration are abnormal. When an abnormal condition is found, it should first be stopped to check whether it is caught by an object that is not easily broken, or the plastic breaker is damaged.
5. Check if the particle size of the broken product meets the requirements. If there are too many particles exceeding the specified size, the cause should be found (such as the gap of the screen is too large, the discharge opening is too wide, the hammer is worn, etc.), and appropriate measures are taken to deal with the problem.
4. Keep the feeding of plastic pulverizer even and prevent overload. Prevent unbreakable objects such as metal and wood from falling into the machine. When it is impossible to pulverize, the moisture content of the feed should not be too high; when it is broken by wet method, it is necessary to maintain an appropriate amount of water to prevent clogging due to insufficient flushing and reduce the production capacity.
2. Before stopping the operation of the plastic crusher, the feed should be stopped first and the material in the machine should be drained before the motor power is cut off.
6. When the plastic shredder is shut down, check whether the fastening bolts are firm and how worn the wearable parts are.
7. Parts that are worn out should be replaced or repaired in time.
8. The safety device of the plastic pulverizer should be kept in good condition, and it must not be saved, and the safety device should be invalidated.
If you pay more attention to your daily use, you can make the plastic crusher more durable and more profitable for the company.
Sharp Medical Device Protective Set
Silicone Heat Sleeve,Medical Silicone Protective Set,Sharp Medical Device Protective Set,Sharp Medical Device Silicone Protective Set
GUANGDONG JIANGMEN RONGHAI MEDICAL TECHNOLOGY CO.,LTD , https://www.kimaomedical.com