The strange radish strip processed with white radish is popular among consumers because of its light yellow color, crispy taste, salty and sweet taste. The processing method of the blame radish strip is now introduced as follows for supply.
1. Picking the ingredients at the beginning
The meat roots are thick and strong, the surface is smooth, no branches and cracks, and the fresh white radish without pests and diseases is used as raw materials. The sediment and impurities are washed with water, and the roots are removed. In a clean cement tank with a capacity of 2x2x1 meters, put 3000 kg of fresh white radish, 240 kg of salt, and salt, add 1/5 of the lower layer, 3/10 of the middle layer, and 1/10 of the upper layer. 2. After filling the pool, the bamboo piece is placed in a fence shape, and then uniformly pressed into each piece of clean stone of 50 kilograms. On the third day, turn the pool once in the afternoon. Pour the upper layer of radish into another empty pool, then pour the lower layer of radish on top, then evenly pour the brine and undissolved salt on it, and press the bamboo. Stone, after pouring brine.
2. Marinated
When picking up to the afternoon of the 7th day, first empty the bamboo in the empty pool, then squeeze the first pickled radish, press the bamboo piece, 40 pieces of 50 kilograms of stone, press out the brine. On the morning of the 8th day, the empty pool was washed first, and the squeezed brine was pumped out of the pound; then the radish was placed in the pool and then marinated according to the ratio of fresh radish 100 kg and salt 8 kg. The amount of salt is much lower, and the cover salt accounts for 35% of the total salt. After filling the pool, squeeze it around with a clean pouch, place a piece of bamboo, and apply 40 pieces of 50 kg of stone. After 14 days, the brine is measured and the quality is checked. The brine is preferably 17 degrees.
3. Brine maintenance
In order to ensure the quality of the billet, the billet pool should be prepared. The pool used within 6 months should be guaranteed not to remove salty brine. The pool used for more than 6 months must be sealed. The method is as follows: the pool is marinated for about 20 days, the brine is drained from the pool surface, and after the radish of the radish on the pond surface is drained, the crushed stone is removed, and the bamboo slab and the pouch are taken out, and the flat radish is slightly higher in the middle. Cover the pouch, the straw bag, and wrap it around, and use the foot to seal the pool. Regularly check to prevent the grass bag from being soaked in brine or reduced in brine. It was found that the brine was lowered and replenished in time to avoid dehalogenation and deterioration of the slab. At the same time, the pool surface should be covered with rain-proof equipment to prevent the rainwater from flowing into the mold and reduce the quality.
4. Cut rinse
Use a yellow or white, smooth surface, no mold, no sand and impurities, cut into 10-11 cm billet, weigh it, rinse repeatedly with water, wash to saltiness to 7 degrees So far, put it into the press after 12 small presses, minus 70% of the moisture weight is considered qualified. According to the 100 kg of the slab after dewatering, 100 g of MSG, 150 g of saccharin, 15 kg of sweet noodle sauce, 100 g of sodium benzoate and 500 g of shochu, the mixture is first dissolved and then immersed in the slab. And immediately turn the cylinder. After that, the tank was turned twice a day. On the morning of the fifth day, 10 kilograms of sugar was evenly removed on the slats in proportion, and the cylinder was turned over once in the afternoon. The next morning, it became a sweet and radish strip. When mixing the material, the cylinder head and cylinder head should be wiped clean. The used container should be washed with boiling water and reused. Finally, after loading the scented sweet radish strips with the weight specifications, they can be exported.
Carbomer
Carbomer is an acrylic resin obtained by cross-linking pentaerythritol with acrylic acid. It is a very important rheological regulator. After neutralization, carbomer is an excellent gel matrix, which has important applications such as thickening suspension. According to the dry product calculation, including carboxylic acid group (-cooh) should be 56.0 % ~ 68.0%.
Common carbopol series include: Carbopol 940, 941, 934, 1342, 980, ETD 2020, AQUA sf-1, Ultrez 21, Ultrez 20, etc.
Carbomer,Carbopol,Carbopol 940, Carbomer 940, Carbomer 980, acrylic acid
Xi'an Gawen Biotechnology Co., Ltd , https://www.ahualynbios.com