In fact, the use of the ball mill is important during the running-in period. Only the correct use of the machine can reduce the failure of the machine during operation. The following describes the matters that the ball mill needs to pay attention to in the early stage.
(1) Pay attention to check the lubricating oil, hydraulic oil, coolant, brake fluid and fuel oil (water) frequently, and pay attention to check the sealing performance of the whole machine. At the same time, the lubrication of each lubrication point should be strengthened. It is recommended that the lubrication point be filled with grease for each shift during the running-in period (except for special request).
(2) Keep the machine clean, adjust and loosen the loose parts in time to prevent the parts from being worn out or the parts being lost due to looseness.
(3) During the running-in period, the machine should be forced to support, check and adjust the work, and pay attention to the exchange of oil.
(4) Since the ball mill is a special vehicle, the operator should receive training from the manufacturer to fully understand the structure and performance of the machine. Before operating the machine, you must first browse the use of the protection manual, follow the instructions of the manual to operate and support.
(5) Pay attention to the working load during the running-in period. The working load during the running-in period should not exceed 80% of the rated working load, and the appropriate workload should be deployed to prevent the overheating caused by the long-term operation of the machine.
(6) Pay attention to the inspection of each instrument frequently. If it is abnormal, stop it in time to eliminate it. If the cause is not found and the fault is not eliminated, the operation should be finished.
Opal Glass Pot,Bowl,Opal Ware Bowl
Harvit Ceramic Co., Ltd. , http://www.czhvceramics.com