When using a dehumidifying dryer, it often happens that the inside of the dehumidifying dryer overflows, which makes many operators wonder why the inside of the dehumidifying dryer will overflow. This is because the dehumidification dryer has been running for too long, and the internal water removal amount is too full and overflow occurs. So how to solve the internal overflow of the dehumidifying dryer?
When using a dehumidifying dryer, if the amount of water stored in the container is too full, in order to avoid spillage, when you are moving the body during operation, you must first unplug the power supply and then drain the water in the water tank. When the dehumidifying dryer is moved, the zui is placed for 4 to 6 hours in advance, because the compressor pipe in the dehumidifier contains cold coal, and it takes 4 to 6 hours for the cold coal to return to the original position during the handling process. .
After the water in the bucket is poured, the filter mesh needs to be cleaned. Of course, cleaning is also tricky. Cleaning the filter mesh with water below 40 °C is good, cleaning with a cleaner is better, after washing off the dust, the water is cleaned, dried and then returned to the body. When cleaning the body, wipe it gently with a damp cloth. Do not clean it directly with water to avoid damaging the electrical insulation. Adhesives on the surface of the body can be cleaned with soapy water. Do not use gasoline, petroleum spirits, etc. When you travel, please unplug the dehumidifying dryer to maintain the life of the machine.
When the amount of water stored in the dehumidifying dryer overflows, the floor and the machine must be wetted. Therefore, in order to avoid unnecessary trouble, the operator should properly discharge the water storage bucket of the dehumidifying dryer to avoid overflow.
Mask-Sleeping Mask,Moisturizing Sleeping Mask,Upgraded Eye Mask For Sleeping,Best Mask-Sleeping Mask
Guangzhou Lingxue Cosmetics Co., Ltd , https://www.gzlxgj188.com