Maintenance and maintenance of combine harvester

After the combine harvester completes the harvesting work, it should do the following work well before it can enter the custody of the warehouse so as to maintain good conditions in the coming year. 1. Cleaning (1) Please clean dirt and straw in all parts. The threshing, engine, and electrical parts must not be flushed directly with pressure water. (2) Open the cleaning openings to remove residues. Second, the engine protection (1) fuel tank filled with oil to prevent the occurrence of rust; (2) The battery should be charged regularly, every 2 months in summer, winter once every 3 months to charge once. In addition, long-term storage will remove the negative pole (-) of the battery from the machine. Third, long-term preservation of the injection of oil in the following parts of the oil or coated with butter to prevent rust. (1) All chains and cutters of the harvesting department; (2) Chains of threshing parts; (3) Selection of exposed parts of board pull wires; (4) Support parts of various pressure bars; (5) Tensioning screws of various belts. Fourth, storage methods (1) The machine should be stored in a place with low humidity and good ventilation, the best plank below the machine; (2) The rods should be placed in the interrupted position; (3) The operating conversion rod should be placed in the "chopped Position; (4) The grass pole and the pedals should be folded well; (5) Put on the grass protection board and lower the header as much as possible, and put the long sleeper pad under the cutting table; (6) Close the key switch , And cover the hood; (7) do a good job of rat protection to protect the wire circuit.

Steamed Bun

Steamed Bun,Yummy Steamed Bun,Food Flower Roll,Soft Steamed Bun

Ningxia Shuweixian Potato Food Science and Technology Development Co., Ltd. , http://www.shuweixianfood.com